Well drilling and pump repair in Kasson — we handle both ends of a well's life here: the no-water call when a pump quits, and the new well when a home goes up or an old well gives out. Kasson is the Dodge County seat, west of Rochester on Highway 14.
Kasson homes mix older in-town wells with newer builds on the edge of town, so we see everything from tired shallow pumps to brand-new drilling on fresh lots.
Kasson repair calls split by the age of the street: older in-town wells come in with tired shallow pumps and worn switches, the newer edge-of-town builds with tanks and control boxes giving up early. Either way it's one failed part most days — a pressure switch runs $125–$300, a control box $175–$500 — and every repair price includes the $100–$200 service call.
Kasson lots split two ways: older in-town wells are shallower and cheaper to drill, new builds on the edge of town run deeper through mixed glacial ground. Your written estimate prices your lot by the foot after we look — not the town average. The bands are $28–$50 a foot in sand and gravel, $40–$60 in mixed ground, $50–$65 in bedrock, plus the completion package; a typical complete well lands in the $10,500–$17,500 range at 200 feet, over a 4–8 week timeline.
You get a free written estimate after an in-person look before any of it starts, and our phones are answered around the clock — Kasson is a short run west on Highway 14.
Well Pump Repair & Replacement in Kasson
Repair starts with testing, not guessing: switch, control box, and tank charge first, because those are the cheap failures. If the pump itself has to come up, we'll tell you what the pull involves before we start — pump pull and motor work runs $950–$2,650.
When a pump in Kasson is past fixing — the working rule is a repair bill over half the cost of a new pump — replacement runs $450–$1,400 for a shallow or jet pump, $1,000–$2,500 for a standard submersible at 100–300 feet, and $1,500–$5,000 for a deep submersible.
Well Drilling in Kasson
A new well in Kasson is one job with us, run in the order the state requires: site visit and setbacks checked first, the permit filed, then the hole drilled. We set the casing and grout the ring around it to seal the well, then finish with the pump, pressure tank, and electrical hookup — and the well record is filed once the water's on. The full breakdown lives on our well drilling cost page.
Most of our Kasson drilling is a new build on the edge of town or a tired in-town well being retired. Either way the price is written down before the rig rolls — depth and geology priced in the estimate up front, not discovered on the invoice.
Pressure Tanks, Inspections & Testing in Kasson
Pressure tanks here run $400–$2,500 installed depending on size, and a failing tank is behind a lot of 'pump problems' — it short-cycles the pump until the pump gives up. For home sales, a well inspection runs $250–$550, a septic compliance inspection $300–$650, or both on one visit for $400–$650, with lab water testing added when a lender asks for it.
How the work runs
1. Call and tell us what's going on
No water, low pressure, or a new well to plan — a few minutes on the phone sorts most Kasson calls into repair, replacement, or drilling.
2. We come look in person
Estimates are done standing at your well, not from a desk. That's how the written number ends up matching the final bill.
3. You get a written estimate
Price, scope, and timing in writing before any work starts. No work begins on a verbal okay.
4. We do the work
Repairs usually finish the same visit. Drilling runs on the schedule we gave you — and we say plainly that a new well is a 4–8 week process, most of it scheduling and permits.
5. Water on, paperwork in hand
We run the water clear, check pressure at the tap, and leave you the paperwork — invoice, and the well record on a new drilling job.
Drilled a new 210-foot well in mixed glacial ground outside Kasson for a new home build. Casing, pump, pressure tank, electrical hookup, and permit handled as one job with one written price.
“Building new, we needed the whole thing — hole, pump, tank, the works. One crew, one price in writing, and water was on right when the house was ready for it. The 4-to-8-week timeline they quoted is the timeline we got.”
Final price: $13,800 · Drilling 2 days; complete over the build schedule.
Well trouble in Kasson, or planning a new well? Call (612) 260-8779 — we answer around the clock — or send the form and we'll call you back.
